Answer
- Make sure the eraser is attached to the pen.
- Try a different surface. The eraser might work better on some surfaces than others.
- Try using the eraser in a different way. For example, try rotating the pen while you use the eraser.
why is my surface pen eraser not working
How to use the Surface Pen | Microsoft
To get your Surface Pen eraser to work, make sure the eraser is facing the right way. The eraser should be facing downwards so that it can erase any markings on the screen. If it is not facing the right way, you can rotate it by pressing and holding the eraser button and rotating it until it is in the correct position.
There is not much wrong with the Surface Pen, but there are a few things to watch out for. One common problem is that the pen can stop working if it is dropped, so be careful not to drop it! Additionally, the pen can sometimes stop working if the battery runs out. Be sure to keep the pen charged and you should be good to go.
To calibrate your Surface Pen, open the Start menu and select Settings. Select Devices, then select Pen and touch. Under Calibration, select Calibrate. Follow the on-screen instructions to complete the calibration.
There are a few things you can do to troubleshoot a Surface Pen that’s not working. First, make sure the pen is properly connected to your device. The pen should be firmly attached to the side of the device, and the tip of the pen should be touching the screen.
If the pen is properly connected but isn’t working, try restarting your device. If that doesn’t work, try removing and reinstalling the drivers for your device.
If the stylus pen is not working, first make sure that the battery is inserted correctly and that it is not dead. If it is a digital stylus, make sure that the pen is turned on. If the pen still does not work, try cleaning the tip of the pen with a cloth. If that does not work, the pen may need to be replaced.
There are a few things that could be causing this issue. First, make sure the tip of the pen is clean and free of any debris. If it is still skipping, try adjusting the pressure you are using when writing. If it is still not working correctly, the pen may need to be replaced.
To test if your Surface Pen is working, try drawing on the screen. If the pen doesn’t work, try replacing the battery.
Where is the LED on Surface Pen?
The LED is on the end of the pen that you hold. It lights up when you press the pen to the screen to indicate that the Surface is detecting the pen.
The Surface Pro pen does not require calibration.
The Surface Pen is very sensitive because it uses a digital pen tip that senses pressure and location. This allows you to write or draw with great accuracy and detail.
Yes, the Surface Pro pen is pressure sensitive. This means that the harder you press down on the pen, the more ink will be applied to the screen, allowing for a range of artistic possibilities.
There is no definitive answer to this question as it depends on a number of factors, such as the type of pen, the material it is made from, and how often it is used. However, most stylus pens should last for at least a year with regular use.
If the rubber tip on your stylus is worn down, you can fix it by replacing the tip with a new one. First, remove the old rubber tip by pulling it off. then, insert the new rubber tip and press down until it is secure.
There are a few things you can do to try and fix a passive stylus that’s not working. First, make sure the tip is clean and free of any debris. If it is, try gently bending the tip of the stylus back into shape. If that doesn’t work, you may need to replace the stylus.
There are a few ways to make your pen pressure sensitive. One way is to use a Wacom tablet. Another way is to use a pen with a built-in pressure sensor.