how to make your iphone stop charging at 100?

To turn off your laptop battery, you’ll need to locate the power button. It’s usually a small, circular button located on the laptop’s upper-right corner. Once you’ve found it, press and hold the button until the computer turns off.

If your laptop’s battery is full, it will stop charging to prevent the battery from overcharging.

To change your battery from 80 to 100, you will need to do the following:
Open up your battery case.
Remove the old battery.
Insert the new battery.
Close your battery case.
Power on your device.

4G hotspots are typically faster than Wi-Fi, but this depends on a variety of factors, including the quality of the Wi-Fi connection and the number of people using it.

Yes, Wi-Fi tethering is free. However, the data you use while tethering may not be.

The hot spot is the area in the lower mantle where the mantle is hottest. The temperature in the hot spot can exceed 4000 degrees Celsius.

Yes, USB tethering is safe for battery. When you’re tethering your device to your computer, the computer is actually doing all the work, so your device’s battery won’t drain as quickly.

There are a few ways to stop your laptop battery charging at 80%. One way is to disable the charging feature in your laptop’s BIOS. Another way is to use a third-party software application to stop the charging.

There is no one-size-fits-all answer to this question, as the USB power saver feature may be enabled or disabled on different devices in different ways. However, some tips on how to disable the USB power saver feature on various devices are available online. For example, on an iPhone, you can disable the USB power saver by going to Settings > Battery and turning off the Low Power Mode switch.

To turn off USB standby power, you can either disable the USB ports in the BIOS or use a USB port blocker. To disable the USB ports in the BIOS, restart your computer and press the Delete or F2 key to enter the BIOS. Navigate to the Advanced tab and look for the USB Configuration setting. Change the setting from Enabled to Disabled and save your changes. To use a USB port blocker, simply plug it into a free USB port and it will disable the port.

There are a few ways to turn off USB power. One way is to hold the power button on the device for a few seconds until it turns off. Another way is to go into the device’s settings and disable the USB charging feature.

There are a few ways to stop your computer from charging USB devices. One way is to disable the USB ports in the BIOS. Another way is to use a software program like USB Defender.

There are a few ways to stop your computer from charging your phone. One way is to unplug the phone from the computer once it is fully charged. Another way is to disable the charging function in your computer’s settings. To do this, go to Control Panel > Hardware and Sound > Power Options and select the “Change what the power buttons do” option. From there, deselect the “Charge my device” option.

There are a few possible explanations for why your iPhone only charges on the computer. One possibility is that your computer has a higher wattage than your iPhone charger. Another possibility is that there is something wrong with your iPhone charger. Finally, it’s also possible that there is something wrong with your iPhone’s charging port. If you’re not sure which of these possibilities is causing the problem, you can try using a different iPhone charger or take your iPhone to an Apple store for service.

To set your iPhone to only charge 80%, open the Settings app and tap on “Battery.” Under “Battery Health,” tap on “Max Capacity.” Then, drag the slider to the left so that it says “80%.