Answer
To open a Droid Maxx, you will need to use a paperclip or something similar to press and hold the small button on the back of the phone. Once you have done that, slide the phone open.
how do you open a droid maxx
Motorola DROID MAXX Repair XT1080 – Full Teardown (screen, camera, battery, vibrator, speaker)
To take the back off your Droid Maxx, you’ll need to remove the screws on the back of the phone. There are six screws in total, three along each side. Once the screws are removed, you can pry the back off of the phone using a thin object like a credit card.
To insert a SIM card into a Droid Maxx, first locate the SIM card slot. It’s on the top of the phone, near the headphone jack. Gently insert the SIM card into the slot, then press down until it clicks into place.
The battery in a Droid Maxx can be changed by removing the back cover and the battery. The battery is held in place by two screws.
To remove the SIM card from a Droid Maxx, you will need a paperclip or something similar. First, locate the SIM card tray on the side of the phone. Then use the paperclip to push the tray out. The SIM card should pop out and you can then remove it from the tray.
The back of a Motorola Droid can be opened by gently prying it open with a thin object like a guitar pick or a SIM card removal tool.
The Droid Maxx does not have a SIM card.
Yes, Droid does have a SIM card slot. This allows you to use your phone with a different carrier than the one you originally purchased it from.
The SIM card goes in the back of the phone, in the battery compartment.
Open the SIM card tray by inserting a thin object like a paper clip into the hole on the side of your phone and pushing in.
Take out the SIM card and store it somewhere safe.
Reinsert the SIM card tray and push it back in until it clicks.
To remove the SD card from a Droid MAXX 2, you will need to locate the SD card slot. The SD card slot is on the top of the phone, next to the headphone jack. You will need to use a fingernail or a thin object to pry open the SD card slot. Once the SD card slot is open, you can remove the SD card from the phone.
The Droid Turbo has a SIM card tray on the side of the device. To remove the SIM card, insert a paper clip or SIM eject tool into the hole next to the tray and push until the tray pops out. Remove the SIM card and replace the tray.
There are a few ways to open the back of a phone. One way is to use a tool such as a pry bar or guitar pick to pop the back off. Another way is to use heat to soften the adhesive that holds the back on, and then pry it off.
There are a few ways to take apart a Motorola. One way is to use a guitar pick or something similar to pry the back off. Another way is to use a screwdriver to remove the screws on the back.
To change the battery in a Motorola Droid, you will need to remove the back cover of the phone. The battery is located in the upper-left corner of the phone. To remove the battery, you will need to use a prying tool to lift up the battery clip. Once the battery clip is lifted up, you can remove the battery from the phone.
There are a few ways to turn on your Droid Turbo without the power button. One way is to use the Motorola TurboPower Pack, which is a battery pack that you can use to charge your phone and also use as a power button. Another way is to use an app called “Button Savior.” Button Savior is an app that will allow you to use other buttons on your phone to turn on your screen and power on your phone.