how to put oil in car without funnel?

There are a few ways to do this. One way is to pour the oil into a plastic bag and then cut off one of the corners of the bag. You can then use this as a makeshift funnel. Another way is to use a piece of paper. Fold the paper in half twice so that it forms a cone. Tape or glue the edges together, and then use it as a funnel.

There is no one definitive answer to this question. Some people might say that you don’t need a funnel to fill oil, while others might say that you do. It really depends on the specific situation.

There are a few things you can do to avoid spilling oil when pouring it into your car’s engine. First, make sure the car is parked on a level surface, and use a funnel to pour the oil into the engine. If possible, try to pour the oil slowly and steadily, rather than in one big rush. Finally, be careful not to overfill the engine – if there’s too much oil, it will spill out when the car is started.

To make a homemade car funnel, you’ll need a few basic supplies: a piece of cardboard, a sharp knife or scissors, and some tape.
Start by cutting out a circular piece of cardboard. If your car has a tapered fuel spout, make the circle slightly smaller at the top than at the bottom.
Next, cut out a small hole in the center of the circle. This will be your funnel’s spout.

There are a few things you can use in place of a funnel. A colander or strainer can work in a pinch, or you can use a piece of cloth or paper towel. If you’re really in a bind, you can even use your hand. Just be careful not to spill any of the liquid or material you’re trying to transfer.

There are a few ways to do this. One is to use a piece of paper. Make a cone out of the paper and then tape it together. You can also use a rolled up piece of paper. Another way is to use a metal or plastic bottle. Cut off the top of the bottle and then cut a small hole in the bottom.

You can pour oil into your car, but it’s not a good idea. When you change your oil, you should also change your filter. If you don’t, the old filter will just keep circulating the old oil and it won’t get cleaned.

There are a few ways to pour oil into your car. One way is to use a funnel and pour the oil into the engine. Another way is to remove the cap on the engine and pour the oil in that way.

Adding oil to your car is a relatively simple process. First, locate the oil filler cap on the engine. It’s usually on the top or side of the engine. Unscrew the cap and pour in the desired amount of oil. Replace the cap and start the engine. The oil will circulate through the engine and be distributed evenly.

If you spill oil on your engine, the best thing to do is to clean it up as quickly as possible. The oil can damage the engine if it is not cleaned up.

To make a paper oil funnel, you will need a piece of paper, a pencil, scissors, and tape.
Fold the paper in half width-wise. Cut out a semicircle at the folded edge. Unfold the paper and tape the cut edge closed. Turn the funnel inside out so the taped edge is on the inside. Use the pencil to make a small hole in the pointed end of the funnel. Your oil funnel is ready to use!

To make a funnel out of aluminum foil, first fold the foil in half so that it forms a cone shape. Then, twist the edges together to secure the cone shape. Finally, use a sharp object to create a small hole in the tip of the cone.

You can make a funnel out of sheet metal by cutting a circular piece out of the sheet metal and then bending the metal around to form a cone-shaped funnel. You can use a hammer and some pliers to help you bend the metal into shape.

To make a transmission fluid funnel, you will need a piece of PVC pipe, a hacksaw, and a drill. First, use the hacksaw to cut the PVC pipe into two pieces – one that is 6 inches long and one that is 8 inches long. Next, use the drill to make a hole in the center of one end of the 6-inch piece of PVC pipe. Finally, use the funnel to fill the 8-inch piece of PVC pipe with transmission fluid.

You can make a funnel without a funnel by using a piece of paper. First, fold the paper in half so that it forms a cone. Then, cut off the pointy end of the cone and tape the two edges together. You can now use your homemade funnel to pour liquids or powders into smaller containers.