Answer
- There are a few things that could cause your iPhone not to restore in recovery mode.
- If you’re having trouble restoring your iPhone, try these steps:
- Make sure that your iPhone is fully charged.
- Try connecting your iPhone to a power source and a computer using the cable that came with it.
- Reset your iPhone by holding down the Sleep/Wake button and Home button at the same time until the Apple logo appears.
4.
iPhone Won’t Restore in Recovery Mode? Here is the Fix! | Top 3 Ways
FIX IPHONE NOT TURNING ON/Stuck At Recovery Mode/Apple Logo/ iOS 13 and below – iPhone XR/XS/X/8/7/6
There are a few reasons why iPhone Recovery Mode may not be working. One possibility is that your iPhone is not connected to your computer properly. Another possibility is that you may not have installed the correct software on your computer.
Recovery mode is designed to help you fix problems and get your device back to working like new. However, if you’re unable to complete the recovery process or if your device won’t boot into recovery mode, please contact customer service for assistance.
If your iPhone is stuck in recovery mode, you can try these steps:
Reset your iPhone by holding down the home and power buttons until the Apple logo appears.
Restore your iPhone from a backup.
Try a different cable or charger.
If you are in recovery mode, connect your iPhone to your computer with a USB cable. On the iPhone’s screen, click “Restore.” If you are not in recovery mode, follow these steps:
Turn off your iPhone.
Hold down the Power and Home buttons until you see the Apple logo appear.
Release the Power button but keep the Home button pressed until you see the “Connect to iTunes” screen.
4.
If your phone is not responding to normal methods, like pressing the power button and home button at the same time, you may need to force your phone into recovery mode. To do so, hold down the power button and home button until the phone turns off, then press and hold the reset button until the phone starts up again.
Yes, iTunes will recognize a disabled iPhone.
Recovery mode is a special mode that your computer enters when it can’t boot normally. To fix recovery mode without command, you can try to boot your computer into safe mode, which is a lower-level operating system that doesn’t require all the features of the normal operating system. You can also try to use a recovery disk or USB drive to fix your computer.
It usually takes a few minutes for your device to enter recovery mode.
The “no command” message is a warning that you are in recovery mode and cannot perform any commands.
There are a few ways to fix recovery mode:
-Reboot the device and hold down the power button until it restarts.
-Boot into recovery mode by pressing and holding down the volume up, home, and power buttons simultaneously until the device reboots.
-Use a computer with a USB cable to connect the device to the computer and use a software tool to restore the device.
Restarting the bootloader can be done in a few different ways. The most common way is to hold down the power button and the volume up button while turning on the device. Another way is to use a computer and a USB cable.
After restoring your iPhone, you should see the “Welcome Back” screen and then be able to use all of the features of your iPhone.
The “no command” message is a warning that you are in recovery mode and cannot perform any commands.
Factory resetting an iPhone can take a while due to the amount of data that needs to be erased. This includes settings, applications, and all of the user’s content.
No command means that the computer is not asking for input.